Industrial Hydraulic Services That Cover The Whole Circuit
Industrial hydraulic services is a broad category — and most shops that claim to offer them actually only handle one narrow slice: usually hoses, or cylinders, or maybe pump exchange. Ames Hydraulics is the exception. Real industrial hydraulic services means every hydraulic subsystem in a plant floor circuit gets covered by the same shop, the same techs, and the same warranty. That is what we do week-in-week-out for central Iowa manufacturers, food processors, metal fab shops, and paper and plastics operations. When a hydraulic press or an automated production line goes down, one call gets the whole problem solved.
The industrial hydraulic services we offer are structured to handle both the emergency (a line is down, plant is losing money by the hour) and the preventive (routine sampling, filter service, pressure checks that catch failures before they become disasters). Both matter. Emergency response is what plants remember; preventive service is what saves them from ever needing it.
The Full Menu Of Industrial Hydraulic Services
- Hydraulic pump rebuild — piston, vane, and gear pumps rebuilt on the bench with new bearings, seals, and any wear parts past service limits. Bench-tested at working PSI before it goes back on the line.
- Hydraulic motor rebuild — piston, vane, gerotor, and orbital motors. Same discipline as pump work: measured to tolerances, replaced against factory service limits, pressure-tested.
- Hydraulic cylinder rebuild — reseal, rechrome, hone, gland service, rod polish or replacement. All cylinders pressure-tested before they leave the shop.
- Hydraulic valve rebuild — directional, pressure-reducing, sequence, pilot-operated check, and cartridge valves. Rebuilt or replaced against factory spec.
- Hose fabrication and repair — every hose size and end configuration a plant runs, cut and crimped in-house. Same-day for standard configurations; day-out for less common ends.
- Reservoir cleaning and flushing — after a catastrophic failure the reservoir has to be drained, cleaned, and refilled with new fluid. Skipping this step is how the second pump grenades three months later.
- Full-system diagnostics — tied-in gauges, case-drain flow measurement, temperature checks, and pressure verification across the whole circuit. Written diagnostic report so the plant knows what needs to happen before parts are ordered.
- Preventive maintenance contracts — scheduled visits or drop-off cycles for oil sampling, filter change, pressure and flow verification, and cylinder inspection. Costs less than emergency work, keeps the line running.
Industries We Cover With Industrial Hydraulic Services
The specific industrial hydraulic services need varies by industry but the disciplined process is the same. Common customer categories across central Iowa:
- Food processing — dairy, grain, meat, and packaged food operations run hydraulic presses, palletizers, case packers, and material handling equipment. Downtime during production is expensive.
- Metal fabrication and machine shops — press brakes, ironworkers, punch presses, and hydraulic clamping systems all hit our bay routinely.
- Plastics injection molding — the presses themselves plus auxiliary hydraulics on material feed and part-removal robots.
- Paper mills and pulp operations — high-tonnage hydraulic clamping, roller drives, and material-handling hydraulics.
- Packaging operations — case erectors, closers, palletizers, and stretch wrappers.
- Municipal and utility — snow plow equipment, salt spreaders, sanitation truck hydraulics, and vehicle-mounted work platforms.
- Agriculture cooperatives — grain elevators, feed mills, and ag-processing operations.
What Makes Our Industrial Hydraulic Services Different
Three things separate our industrial hydraulic services from generic hydraulic shops that also happen to serve plants:
- One shop covers the whole circuit. Pump, motor, cylinder, valve, hose. Not “we do cylinders but you’ll need someone else for the pump” — that is how plants end up with three vendors, three warranties, and three bills for one repair.
- Written estimates before parts get ordered. After diagnostic or tear-down, you get an itemized quote in writing. No surprise bills is the working principle here, particularly on plant accounts where invoices go through multiple approvals.
- Warranty on the workmanship, not just the part. Terms print on every invoice. If a rebuild fails inside the warranty window, we make it right — that is how we keep a fleet-account customer.
How To Start Using Ames For Industrial Hydraulic Services
Two paths, both start the same way:
- Emergency work. Call 515-292-2599. Describe the failure and what production is down. We prioritize plant emergencies and can often deliver same-day diagnostic response.
- Set up a fleet account. Larger plants and multi-site operations set up a purchase-order billing relationship. Give us your billing contact and PO process — we onboard in under a week and you get priority queue on future work.
Central Iowa Coverage Area For Industrial Hydraulic Services
Ames Hydraulics is located at 210 Freel Dr, Ames, IA 50010 — right off I-35 in central Iowa. Free pickup and delivery within 60 miles of Ames covers Ames, Ankeny, Nevada, Story City, Boone, Huxley, Des Moines, Cedar Rapids, Iowa City, and points between. Out-of-state industrial customers ship failed components LTL to our shop and we ship back after rebuild and bench test.
Preventive Industrial Hydraulic Services Save Money
The most expensive industrial hydraulic services call is the one at 2 AM when a plant is losing $10,000 an hour and every hour of emergency response is billed at emergency rates. The cheapest is the scheduled preventive visit that caught the failing pump before it exploded and contaminated the whole circuit. Every plant customer we set up on preventive service ends up spending less on hydraulic maintenance annually than they did before — even accounting for the preventive service cost. That math is not a marketing story; it is what actually happens.
Ready To Talk?
Call or text 515-292-2599 with the failure and the machine. A real person here answers, not a phone tree. Or fill out the contact form and we call you back within one business day. Industrial hydraulic services is our week-in-week-out core work — we take plant customers seriously because plant customers keep this shop running as much as we keep their lines running.
Frequently Asked Questions
What kind of businesses need industrial hydraulic services?
Manufacturing plants, food processors, metal fabricators, paper mills, plastics operations, packaging lines, machine shops, and any facility running hydraulic presses, injection molders, or automated production equipment.
What is included in industrial hydraulic services?
Pump and motor rebuild, cylinder rebuild, valve rebuild, hose fabrication, reservoir cleanup, full-system diagnostics, and preventive maintenance contracts. All done in one shop by the same techs.
Can Ames Hydraulics come to our plant?
For hose failure, small emergency work, and diagnostic visits, yes on a case-by-case basis within central Iowa. Cylinder, pump, and motor rebuilds require the bench and pressure-test setup — those units come to our Ames shop.
How does industrial hydraulic services pricing work?
Every job gets a written estimate after diagnostic or tear-down. No sight-unseen quotes. Fleet-account customers get PO-based net-30 billing after setup.
Do you handle preventive maintenance on industrial hydraulic systems?
Yes. Scheduled system audits — oil sampling, filter replacement, pressure/flow verification, and cylinder seal inspection — done on the plant’s turnaround schedule.
How fast can you turn a critical industrial hydraulic repair?
Emergency hose and hydraulic line fabrication is same-day when the unit or the hose is in our shop. Cylinder and pump rebuilds run 3-10 days depending on parts and scope.